Results 1 to 13 of 13

Thread: Tell me more

  1. #1

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0

    Tell me more

    Hi guys just bought Meself this, was an impulse buy! saw the words pasini and bzm and at £195 I thought I'd take a risk without knowing too much about it. I'm looking to start meeting up Hullavington on Friday nights for a bit of fun and to get me away from the farm for a few hours! So is it any good or have I bought a lemon?....

  2. #2

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    Oh how do I add a photo?

  3. #3

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    It's in rossi yamaha fiat livery, water cooled with a bzm bottom end motori top end

  4. #4

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    So I have finally picked the bike up and overall I am happy with my purchase. It does need a little tlc but hopefully nothing major. For sure it needs a new chain and sprocket I will only be riding at Hully at the mo it has a 6t front sprocket whats best on the rear 70? Also the seat fairing need repairing as it's cracked around the fixing bolt. Do u think this is an original pasini fairing or another? If its original pasini I will prob have to repair as I believe they are difficult to get hold of but if its from something else maybe I could still buy a new replacement?

    Sent from my G8441 using Tapatalk

  5. #5

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    And what about the front brake setup? I understand some of these didn't come standard with any front brake does it look like this was one of them and maybe the caliper mounts have been welded on after? Would anybody know from just looking at the pic what replacement pads I would need? Sorry so many questions I'm just keen to know what it is I've bought and how to get it running sweet, any help would be much appreciated

    Sent from my G8441 using Tapatalk

  6. #6

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    Hmm is this forum still alive or is there somewhere else?

  7. #7

    Join Date
    Oct 2007
    Location
    Bristol
    Posts
    1,116
    Rep Power
    60
    Nifo brake setup is standard for Pasinis.
    It look ok if you can adjust them and get them working ok. Lots of people changed them as the calipers drag on the disc if the springs are missing.

  8. #8

    Join Date
    Oct 2007
    Location
    Bristol
    Posts
    1,116
    Rep Power
    60
    Quote Originally Posted by ianh8026 View Post
    Hmm is this forum still alive or is there somewhere else?
    Most people are on Facebook now :-(

  9. #9

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    So I'm hoping to get the bike put back together this weekend if all my bits turn up in time. Now I'm expecting this bike to be far to quick for me whilst I'm learning its a 49cc 6 port I believe with standard pasini under exhaust but with Cs racing end can and a 19mm carb. I've already changed to blue springs in the clutch and ive been thinking about putting a 14 carb on it whilst I get used to it. Is there anything else I could do which would make it more rideable at lower revs (beginner friendly) pls no comments saying how I should have bought a 4.2 I know that's what I should have done but I'm stuck with this now and I quite enjoy the struggle.

    Sent from my G8441 using Tapatalk

  10. #10

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    Correction its a 40cc not 49

    Sent from my G8441 using Tapatalk

  11. #11

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    And if anyone has a spare 14 carb pm me


    Sent from my G8441 using Tapatalk

  12. #12

    Join Date
    Jan 2012
    Location
    Essex
    Posts
    3,491
    Rep Power
    93
    Yes thatís all standard Pasini bits there mate

    Nice bikes to ride

  13. #13

    Join Date
    Apr 2011
    Posts
    24
    Rep Power
    0
    So still haven't got the bike up and running yet been reading as much info as possible on here to make sure I get it set up sweet. So far I've done the simple things new levers, cables, regreased bearings new chain sprocket etc. Thanks to Cuttsthedon for sorting me out with some new polini calipers which seem to fit perfectly. I've now got a new dellorto sha 14/14 carb but before jetting that I thought I'd do a air test on the engine which failed spectacularly so I've ordered myself a new gasket set so hopefully tonight il pull that apart and sort that out. I've also measured the squish but I've seemed to have quite a bit of inconsistency with the measurements being anywhere between. 35 and. 6 probably just my verniers tho? Hopefully by the weekend I might get it all up and running but I'm expecting the jetting to not be so straight forward

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •