PDA

View Full Version : How to remove cag flywheel key?



alexdavies3
12-10-2012, 12:17 PM
Hi is there any way to remove the cag flywheel key as fitting a full circle crank
Would have a picture but tapatalk isn't working :-(
Cheers
Alex

Bullit
12-10-2012, 01:02 PM
Hammer and flat blade screw driver,that's how I done it

alexdavies3
12-10-2012, 02:25 PM
Ok thanks for the info

Bullit
12-10-2012, 04:14 PM
I'm not saying its the correct way but it worked for me

Chute
12-10-2012, 04:26 PM
just fit a new key.

alexdavies3
12-10-2012, 09:52 PM
Yes I am going to its just I can't get the crank out of the cases because it doesn't fit through the bearing

Chute
13-10-2012, 07:58 AM
so you have the flywheel off then? in that case its a case of gentle tapping with a little hammer and something like a chisel til it pops out. or if you're scrapping the crank and bearings just grind the ***** off

Jon 48
13-10-2012, 08:37 AM
what don't fit through the bearing ?

alexdavies3
13-10-2012, 02:56 PM
The old crank won't come out of the cases because the key on the shaft won't let crank leave the bearing

alexdavies3
14-10-2012, 03:51 PM
http://img.tapatalk.com/d/12/10/14/aje5umet.jpg